Best WC44E90SB Instalační manuál stáhnout pdf (Strana 11)

- 11 -

EXTERNAL BLOWER ELECTRICAL CONNECTIONS

Blower connection at hood:

1. Run 2-wire plus ground power cable fromthe Exterior or In-Line Blower to the hood wiring

box marked “motor connection”. (Fig.8).

2. Remove the cover from the wiring box and remove one knockout.

3. Feed 6” of cable through the knockout opening and secure the cable to the wiring box with

an appropriate connector.

4. Make electrical connections at the hood.Connect white-to-white, red-to-black and green-

to-ground.

5. Replace the wiring box cover and screws, make sure wires are not pinched between the

cover and box.

Exterior or In-line blower connection:

1. Make electrical connections at the exterioror in-line blower (see instructions providedwith

the exterior or in-line blower).

Power connection at hood:

1. Plug the power cord into the electrical wall receptacle.

FIG.8

CONNECT:

WHITE-TO-WHITE,

RED-TO-BLACK,

GREEN-TO-GROUND.

EXTERIOR OR

IN-LINE BLOWER

BLOWER CONNECTION AT HOOD

BOX MARKED

“MOTOR

CONNECTION”

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 71 72

Žádné komentáře

Best WC44E90SB Instalační manuál Strana 11